As a PlayStation 4 owner, you may have faced issues where your games are freezing or lagging. One of the common reasons behind this problem is a dirty laser lens. The laser lens is a tiny lens that reads the disc, and if it's dirty, it can't read the data on the disc correctly. This can result in slow read speeds, stuttering gameplay or loading errors. In this article, we will give you an insight into how to clean the laser lens on your PS4.
1. Understanding the Importance of Cleaning Laser Lens
Before we dive into the steps of cleaning the laser lens, it's essential to understand why cleaning it is so significant. Over time, dust, and debris can accumulate on the lens, causing a blockage and affecting the disc reading process. When your PS4's lens accumulates dirt, it may result in freezing, lagging, or even complete system failure. Cleaning the laser lens routinely ensures that your PS4 remains optimized and runs smoothly.
2. Preparation for Cleaning Laser Lens
Before you get started with cleaning your laser lens, you'll need a few things such as:
• Cotton swabs or a microfiber cloth
• A can of compressed air
• Isopropyl alcohol (99% or higher)
• A small screwdriver
• A flashlight or a lamp
Once you've collected all the required things, the next step is to prepare your PS4 for cleaning. Begin by turning off the console and unplugging all the cables from it. Take it to an open, well-lit space where you have enough maneuvering room to remove the top cover.
3. How to Clean Laser Lens on PS4
With your PS4 in position, it's time to open the casing and get ready to clean the laser lens. With your screwdriver, remove the glossy plate on top of your console. Once you have removed the glossy plate, you will see the metal cover underneath. Use your screwdriver to unscrew the three screws holding down the metal shield cover. With the metal cover removed, you will now see the optical drive of your PS4.
With the optical drive visible, take your can of compressed air and give it a few blasts. This will help dislodge any dust particles, which may have accumulated on the lens. Once you have blown out the dust, take your cotton swab or microfiber cloth and dampen it with isopropyl alcohol. However, ensure that the alcohol isn't dripping wet as excess moisture may damage the laser lens. Then, gently rub the lens in a circular motion until it becomes squeaky clean. Remember to clean the lens carefully without applying too much pressure.
4. Put Your PS4 Back Together
Once you have completed cleaning your laser lens, it's time to put everything back together. Begin by placing the metal shield cover back over the optical drive, and screw the three screws that were holding it down. Then, place the glossy cover back over the metal plate and screw it in.
5. Assessing the Improvement
Once you have put everything back together, plug in all the cables and turn on your PS4. Test out a few games and make sure they are running smoothly. If you notice any improvements, then you have successfully cleaned your laser lens.
In conclusion, cleaning your laser lens is a simple process that you can do yourself. However, it's vital to take every step carefully and cautiously to avoid damaging your PS4. We hope this article has helped you to understand how to clean the laser lens on your PS4. Remember, if you're not confident in doing it yourself, it's best to leave it to a professional..