how to clean laser wand lens

How to Clean Laser Wand Lens

If you own a laser wand, you know how important it is to keep the lens clean. Over time, dust and debris can accumulate on the lens and cause the laser to become less effective. However, cleaning a laser wand lens can be a bit tricky. In this article, we will show you how to properly clean your laser wand lens to ensure that it stays working properly.

Tools You Will Need

Before you begin cleaning your laser wand lens, you will need a few tools. Here is a list of tools you will need:

1. Soft lint-free cloths

2. Isopropyl alcohol

3. Tweezers

4. Compressed air

Cleaning a Laser Wand Lens: Step-by-Step

Follow these steps to clean your laser wand lens:

Step 1: Power off the laser wand

Before beginning to clean your laser wand lens, it is important to power off the device. Disconnect it from the power source and ensure that the wand is not active.

Step 2: Remove dust and debris

Using compressed air or tweezers, remove any dust or debris from the lens surface. Be very careful not to touch the lens directly with your hands as that can leave fingerprints and scratch the surface.

Step 3: Moisten your lens cleaning cloth

Using a soft lint-free cloth, moisten it with isopropyl alcohol. Be sure to use a cloth with no lint or dust to prevent any debris from transferring to the lens.

Step 4: Gently clean the lens

Clean the lens with the moistened cloth in a circular motion, starting from the center of the lens and working your way out. Be extra careful when cleaning the lens as it is delicate and scratching it can cause irreparable damage.

Step 5: Check for any remaining dust or debris

After you've cleaned your lens, use the compressed air can again to remove any debris. Hold the can upright and spray gently from a distance of a few inches.

Step 6: Clean the sides of the lens

The sides of the laser wand lens can also accumulate dust and debris. Take a new cloth and moisten it with isopropyl alcohol then clean the sides of the lens thoroughly.

Step 7: Let the lens dry before use

After cleaning your laser wand lens, ensure that it is completely dried before use. You can let it air dry or use a clean cloth to wipe it dry.

Additional Tips

Here are some additional tips for cleaning your laser wand lens effectively:

1. When cleaning your laser wand lens, use a gentle touch, as pressing too hard can scratch the lens and render it useless.

2. Avoid using any type of harsh detergent or abrasive cleaner on your lens as this can damage the surface of the lens.

3. If you need to clean your laser wand lens frequently, invest in a lens cleaning kit containing all the tools and supplies you require to clean your lens effectively.

4. Depending on your laser wand, you may need to remove the lens housing to clean it properly. Refer to your wand's user manual for specific instructions on how to remove and clean the lens.

Conclusion

Cleaning your laser wand lens requires a delicate touch and the right tools. By following these simple steps, you can effectively clean your laser wand lens and ensure its longevity. Keep in mind that by cleaning your lens regularly, your laser wand will perform better, and last longer. So, take the time to clean your wand's lens regularly and enjoy a reliable, powerful performance each time you use it.