how to clean thunder laser cutter lens

2023/05/24

How to Clean Thunder Laser Cutter Lens


Laser cutting machines have made our lives easier by speeding up the process of cutting through various materials. However, like any machine, laser cutting machines also require proper maintenance to prevent unnecessary breakdowns and prolong their lifespan. One of the most important maintenance procedures for laser cutting machines is cleaning the lens. In this article, we will discuss how to clean Thunder laser cutter lens effectively.


Why Clean the Laser Cutter Lens?


The lens of the Thunder laser cutter is one of its most critical components. It is responsible for focusing the beam of light that cuts through the material. Over time, the lens can become dirty, resulting in poor cutting performance, blurry edges, and smoke marks on the cut. Cleaning the lens will not only improve its longevity but also ensure that the machine is functioning at its best.


What Tools do You Need?


Before you start, it is essential to gather all the tools that you will need. Here is a list of the necessary items:


- Microfiber cloth

- Lens cleaning solution (Isopropyl Alcohol, Ethanol, or a lens cleaner specifically designed for laser cutting machines)

- Compressed air canister

- Latex gloves


How to Clean the Thunder Laser Cutter Lens?


1. Turn Off the Machine


Before you begin cleaning the lens, ensure that the Thunder laser cutter is turned off and unplugged.


2. Clean Exterior Surfaces


Use a microfiber cloth and lens cleaner to clean the exterior surfaces of the Thunder laser cutter, such as the window, panels, and the lens housing. This will help to remove the dust and debris accumulated on the surfaces, preventing it from entering the machine during lens cleaning.


3. Remove the Lens


Now, you can remove the lens for cleaning. Gently unscrew the lens holder and carefully remove the lens.


4. Blow Off Loose Particles


Use a compressed air canister to blow off any loose particles and debris that may have accumulated on the lens. Hold the lens with your hand or flip it over and spray air on the other side.


5. Clean the Lens


Apply a small amount of lens cleaner on a microfiber cloth and gently wipe the lens from the center outwards in one direction. Do not scrub the lens, as this can scratch the surface. Repeat until the lens is free of any dirt, oil, or smudges. If you are using isopropyl alcohol, let it evaporate for a few seconds before reinserting the lens.


6. Reinsert the Lens


Carefully screw the lens holder back onto the lens and reinsert it back into the Thunder laser cutter.


7. Test the Machine


Once the lens has been reinserted, it is vital to test the Thunder laser cutter to ensure that it is functioning correctly. Run a few test cuts to ensure that the lens has been correctly reinserted, and the machine is functioning at its best.


Prevention is Key


To prevent the buildup of dirt and debris on the lens, you should clean it regularly. You can also use an air filter to reduce the amount of dust that enters the machine. Additionally, avoid touching the lens with your hands, as the oil from your skin can cause smudges and reduce the lens's quality.


Conclusion


Cleaning the Thunder laser cutter lens is a crucial maintenance routine that can ensure the machine's longevity and optimal performance. By using the right tools and following the steps mentioned above, you can keep your laser cutting machine's lens clean and free of dirt and smudges, ensuring that your machine lasts for years to come.

.

CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat
Now

Send your inquiry

Choose a different language
English
Current language:English