how to replace ps3 laser lens


How to Replace PS3 Laser Lens

The PlayStation 3 (PS3) is a popular gaming console that has been around for a while now. Over time, the laser lens in the PS3 may wear out due to continued use, which can cause issues with reading discs or the console may fail to read discs altogether. When this happens, you may want to replace the PS3 laser lens, and this article will show you how to do just that.

Understanding the PS3 Laser Lens

Before you can replace the PS3 laser lens, it's important that you understand what it is and how it works. The laser lens on the PS3 is responsible for reading the data on a disc and providing the necessary information to the console's processing unit, ensuring a smooth gaming experience.

The PS3 laser lens operates by emitting a laser beam onto the surface of a disc, which reflects back to a sensor, allowing the console to read the disc's data. The lens is made of glass and is contained within the disc drive of the PS3 system.

Indications of a Failing PS3 Laser Lens

When a PS3 laser lens fails, it often results in the console's inability to read disks. If your PS3 cannot read disks, this could be due to a dirty or weak laser lens, which may require replacement. Some other signs may include the inability of the PS3 to recognize your disc, skipping or jumping sound while playing, or it may emit a clicking sound when loading the disc.

5 Quick Steps to Replace PS3 Laser Lens

1. Disassemble the PS3

First, ensure that the PS3 is turned off and unplugged from the power outlet to avoid any electrical shock. Next, flip the console over, remove the screws on the bottom panel, and take off the case in order to access the DVD system chassis.

2. Remove the DVD Drive

Unclip the DVD drive and remove it from the chassis by disconnecting the ribbon cable and its power cord.

3. Open the DVD Drive

Once the DVD drive is removed, it's time to open it up. Locate the screws holding the top in place, remove them, and then open the cover to reveal the PS3 laser lens.

4. Replace the PS3 Laser Lens

Take out the necessary screws and remove the old laser. Replace it with your new laser and reassemble accordingly.

5. Test the Console

Before putting everything back together, turn the PS3 back on to ensure everything is working as it should. Once satisfied, reassemble the console and enjoy!


Replacing a PS3 laser lens can seem intimidating at first, but with these quick steps outlined above, it should be a relatively straightforward process. Disc reading on your PS3 is as vital as anything else in the gaming world, so it’s important to be able to address issues like these.

However, if you're not comfortable with performing the operation yourself, it's advisable to contact a professional to carry out the replacement for you. We hope that this article has helped to guide you in your quest for a healthy PS3 system.


Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
Current language:English