how to take scratches off laser lens

How to take scratches off laser lens

Laser discs and CDs have been popular since the 90s. Their quality and durability have always been exceptional. However, the main problem with these discs is that they tend to get scratches over time due to regular use. These scratches prevent the laser from reading the disc properly, which results in skipping, stuttering, and even complete disc failure. In this article, we will show you how to take scratches off laser lens and make your discs as good as new.

Understanding the Scratch

The first thing to understand is the depth of the scratch. Shallow scratches are easier to remove than deep scratches. Deep scratches can cause the disc to become unreadable, and in that case, fixing the disc may be not possible. Fingerprints and dust can also cause problems for the disc, so it is always essential to handle them properly.

Cleaning and Preparing the Disc

Before applying any solution or remedy, it is best to clean the disc and prepare it for the procedure. Hold the disc under cold running water and gently rub it with mild soap or detergent. Rinse the disc thoroughly and let it dry. Do not use hot water or harsh chemicals, as this can damage the disc. Once you have the disc cleaned, you can start to work on the scratch.

Method 1: Toothpaste

Toothpaste is an effective way to remove scratches from a laser lens. Applying a small amount of toothpaste to the disc can help to remove minor scratches. Start by putting a small amount of toothpaste onto a soft cloth. Rub the toothpaste onto the scratch using a gentle circular motion. Be careful not to use too much pressure as it can cause further damage. Once you have rubbed the toothpaste onto the lens, rinse it off with cold water and wipe it dry with a soft, clean cloth.

Method 2: Baking soda

If you have deeper scratches on your disc, then baking soda is an excellent remedy to make them disappear. Mix a small amount of baking soda with water to create a thick paste. Apply the paste to the scratch and ensure that it covers the entire surface of the scratch. Let the paste sit for a few minutes and then rub it gently in a circular motion using a soft cloth. Rinse off the paste with cold water and dry the disc.

Method 3: Brasso

Brasso is a popular product that helps to remove scratches from laser discs. Apply a small amount of Brasso onto the scratch and rub it gently with a soft cloth in a circular motion. Keep rubbing until the scratch disappears. Once completed, rinse the disc under cold water and dry it with a soft cloth.

Method 4: Car wax

Car wax is another solution that helps to remove scratches from a laser lens. Apply a small amount of car wax onto the scratch and rub it gently with a soft cloth. Be sure to apply the car wax lightly and not to use too much pressure. Rub gently until the scratch disappears. Rinse the disc with cold water and dry it with a soft cloth.

Conclusion

These are the four popular methods for removing scratches from a laser lens. For minor scratches, toothpaste is an effective remedy. For deeper scratches, baking soda and Brasso offer the best results. However, be careful when applying any solution or remedy as using too much pressure can cause further damage to the disc. Always handle your discs properly to prevent scratches from occurring, and always clean them gently to avoid any mishaps. By following these methods, you can take scratches off laser lens and enjoy quality music and videos once again.